The installation depth for helical piers is not a fixed number; instead, it is determined by the specific subsurface profile and the need to reach stable, load-bearing strata. According to the provided guide, depth requirements can vary significantly based on soil type:
- Soft Clay: Approximately 5–15 feet.
- Silty Clay or Clay Loam: Approximately 8–20 feet.
- Loose to Dense Sand: Approximately 10–25 feet.
- Gravel or Sandy Gravel: Approximately 12–30 feet.
### Determining the Correct Depth To ensure the pier has reached competent soil, contractors use two primary methods:
- Geotechnical Investigation: Soil borings and test pits identify the depth of the load-bearing strata before installation begins.
- Real-Time Torque Monitoring: As the pier is screwed into the ground, a hydraulic torque motor measures resistance. This torque reading is correlated to soil capacity using ICC-ES AC358 formulas. The installation continues—often using extensions—until the required torque and design depth are achieved.
At a minimum, piers are typically installed beyond the frost line to prevent movement caused by freeze-thaw cycles.
Related FAQs
-
How can Engineering Design Support Reduce Risk for Foundation Contractors?
Read More »: How can Engineering Design Support Reduce Risk for Foundation Contractors?Engineering design support reduces risk for foundation contractors by providing technical oversight and validated documentation throughout a project’s lifecycle. This support helps eliminate guesswork and ensures installations are both safe and code-compliant. Key ways engineering support reduces risk include: Related…
-
How do I Find a Structural Engineer for Project-specific Helical Pier Design?
Read More »: How do I Find a Structural Engineer for Project-specific Helical Pier Design?You can find and secure project-specific structural engineering for helical pier design through several specialized channels and resources: Always consult with a structural engineer or the manufacturer’s specialized engineering team to ensure every project detail—from initial design to permit approval—is…
-
Why is a Professional Engineer’s Assessment Critical before Underpinning?
Read More »: Why is a Professional Engineer’s Assessment Critical before Underpinning?A professional engineer’s assessment is vital for foundation underpinning because it ensures the structural integrity and safety of the project through precise technical analysis. Key reasons for this critical involvement include: Related FAQs
-
What Engineering Resources are Available for Foundation Repair Certification?
Read More »: What Engineering Resources are Available for Foundation Repair Certification?Professional foundation repair certification and training can be accessed through a combination of manufacturer programs and major industry associations. These resources ensure that installers maintain high standards and comply with local building codes. Key resources for engineering and certification include:…
-
Does Helical Technology Provide On-site Technical Support for Installers?
Read More »: Does Helical Technology Provide On-site Technical Support for Installers?Yes, Helical Technology provides on-site training and certification, along with direct access to an engineering team for technical backing. Their support for installers includes: Related FAQs