How Deep do Helical Piers Need to be Installed to Reach Load-bearing Soil?
The installation depth for helical piers is not a fixed number; instead, it is determined by the specific subsurface profile and the need to reach stable, load-bearing strata. According to the provided guide, depth requirements can vary significantly based on soil type:
- Soft Clay: Approximately 5–15 feet.
- Silty Clay or Clay Loam: Approximately 8–20 feet.
- Loose to Dense Sand: Approximately 10–25 feet.
- Gravel or Sandy Gravel: Approximately 12–30 feet.
### Determining the Correct Depth To ensure the pier has reached competent soil, contractors use two primary methods:
- Geotechnical Investigation: Soil borings and test pits identify the depth of the load-bearing strata before installation begins.
- Real-Time Torque Monitoring: As the pier is screwed into the ground, a hydraulic torque motor measures resistance. This torque reading is correlated to soil capacity using ICC-ES AC358 formulas. The installation continues—often using extensions—until the required torque and design depth are achieved.
At a minimum, piers are typically installed beyond the frost line to prevent movement caused by freeze-thaw cycles.
Related FAQs
-
What are the Pros and Cons of Helical Piers vs Push Piers?
Read More »: What are the Pros and Cons of Helical Piers vs Push Piers?When evaluating foundation repair solutions, the choice between helical piers and push piers depends on load mechanisms, soil conditions, and project scale. Below are the primary pros and cons of each system: ### Helical Piers Pros: Immediate Load Capacity: They…
-
Which Pier System is Best for Underpinning a Sinking Foundation?
Read More »: Which Pier System is Best for Underpinning a Sinking Foundation?Selecting the best pier system for a sinking foundation depends on several project-specific factors, including soil conditions, structural loads, and accessibility. Both push piers and helical piers offer reliable underpinning solutions, but they function differently: Push Piers: These are often…
-
Which is Better for Residential Foundation Repair: Push Piers or Helical Piers?
Read More »: Which is Better for Residential Foundation Repair: Push Piers or Helical Piers?Selecting between push piers and helical piers for residential foundation repair depends on your specific soil conditions, the weight of the structure, and the accessibility of the site. ### Helical Piers for Residential Use Helical piers are frequently the preferred…
-
When should I Use Push Piers Instead of Helical Piers?
Read More »: When should I Use Push Piers Instead of Helical Piers?When determining the appropriate foundation repair solution, push piers are typically used in specific scenarios where their unique mechanical principles offer an advantage over helical piers. You should use push piers when: Reaching deep bearing strata: They are an ideal…
-
What Foundation Repair Products do I Need for a Helical Pier Kit?
Read More »: What Foundation Repair Products do I Need for a Helical Pier Kit?A standard helical pier kit provided by Helical Technology includes all the necessary components for field assembly and installation. To successfully implement this system, you will need the following products: Lead Section: This is the initial structural point of load…