Property grading is a critical step in foundation maintenance because it redirects runoff away from your home instead of allowing it to pool against the exterior walls. By reshaping the soil to slope downhill from the building, we ensure that rain and melted snow roll off the landscape rather than seeping into the foundation or causing soil erosion.
To implement effective grading, we recommend following these practices:
- Use Fill Dirt: Add fill dirt rather than mulch or other lightweight materials to fill holes beside your foundation. Mulch can hold moisture and creep into siding gaps, which may lead to moisture traveling behind sheathing.
- Create a Downward Slope: Ensure the highest point of the soil sits directly against the structure, then pat down the earth to prevent settling. You can verify the angle by placing a level on a straight board set against your siding.
- Maintain the Ground-to-Siding Gap: Once the landscape is sloped, ensure there is a proper vertical gap between the finished grade (soil or mulch) and the bottom edge of your siding. This prevents wet soil from splashing under the siding and damaging wall framing.
For persistent issues or complex projects, we recommend consulting a structural engineer or our Engineering Excellence and Design Support team for site-specific guidance. Installations must always comply with applicable building codes and ICC-ES acceptance criteria.
Related FAQs
-
What Factors Influence the Uplift Capacity of a Helical Pier?
Read More »: What Factors Influence the Uplift Capacity of a Helical Pier?The uplift resistance capacity of a helical pier is influenced by several geotechnical, structural, and mechanical factors. According to the provided guide, these include: Related FAQs
-
How is Uplift Resistance Capacity Calculated for Solar Helical Piles?
Read More »: How is Uplift Resistance Capacity Calculated for Solar Helical Piles?The uplift resistance capacity for solar helical piles is calculated by determining the maximum upward load a pile can support before failure. This is primarily established through two engineering methods: Engineers calculate the total capacity by summing the helix bearing…
-
Why is Uplift Resistance Critical for Ground Mount Solar Arrays?
Read More »: Why is Uplift Resistance Critical for Ground Mount Solar Arrays?Uplift resistance is a critical design parameter for ground mount solar arrays because these structures are subjected to significant wind uplift forces. Without sufficient resistance, the upward pressure from wind can exceed the vertical load capacity of the foundation, leading…
-
When is a Building Permit Required for a Deck in Omaha?
Read More »: When is a Building Permit Required for a Deck in Omaha?In Omaha and the Eastern Nebraska region, a building permit is specifically required for any deck project that meets either of the following criteria: When applying for a permit in this region, you should be prepared for the following regulatory…
-
What are the Frost Depth Requirements for Deck Footings in Nebraska?
Read More »: What are the Frost Depth Requirements for Deck Footings in Nebraska?In Nebraska, frost depth requirements for deck footings vary by region and local jurisdiction to prevent structural damage caused by frost heave. General requirements across the state include: Compliance with these depths is mandatory under the Nebraska Building Code and…