Property grading is a critical step in foundation maintenance because it redirects runoff away from your home instead of allowing it to pool against the exterior walls. By reshaping the soil to slope downhill from the building, we ensure that rain and melted snow roll off the landscape rather than seeping into the foundation or causing soil erosion.
To implement effective grading, we recommend following these practices:
- Use Fill Dirt: Add fill dirt rather than mulch or other lightweight materials to fill holes beside your foundation. Mulch can hold moisture and creep into siding gaps, which may lead to moisture traveling behind sheathing.
- Create a Downward Slope: Ensure the highest point of the soil sits directly against the structure, then pat down the earth to prevent settling. You can verify the angle by placing a level on a straight board set against your siding.
- Maintain the Ground-to-Siding Gap: Once the landscape is sloped, ensure there is a proper vertical gap between the finished grade (soil or mulch) and the bottom edge of your siding. This prevents wet soil from splashing under the siding and damaging wall framing.
For persistent issues or complex projects, we recommend consulting a structural engineer or our Engineering Excellence and Design Support team for site-specific guidance. Installations must always comply with applicable building codes and ICC-ES acceptance criteria.
Related FAQs
-
How do I Use a Wire Crimping Tool?
Read More »: How do I Use a Wire Crimping Tool?To use a wire crimping tool effectively for foundation repair or electrical monitoring systems, follow these professional steps based on ICC-approved standards: Preparation: Set up a well-lit, ventilated workspace. Inspect your manual wire crimper or hydraulic tool for damage or…
-
How do I Choose the Right Crimping Tool?
Read More »: How do I Choose the Right Crimping Tool?Choosing the right crimping tool depends primarily on the scale of your project and the specific electrical demands of the application. According to the guide, you should consider the following factors: Project Scale and Load: Manual wire crimpers or crimping…
-
Can a Structural Engineer Provide Load Calculations for Helical Piers?
Read More »: Can a Structural Engineer Provide Load Calculations for Helical Piers?Yes, a structural engineer or a manufacturer’s engineering team can provide load calculations for helical piers (piles). Structural engineering oversight is often a legal requirement for foundation projects to ensure long-term stability and code compliance. Professional engineers provide calculations and…
-
Are There Co-branded Marketing Toolkits for Helical Pier Installers?
Read More »: Are There Co-branded Marketing Toolkits for Helical Pier Installers?Yes, Helical Technology provides co-branded marketing toolkits specifically designed for helical pier installers within their network. These resources are intended to help contractors showcase their technical expertise and build local brand authority while maintaining professional standards. The co-branded marketing toolkit…
-
Are Free Inspections Available for Pier and Beam Foundations in Austin?
Read More »: Are Free Inspections Available for Pier and Beam Foundations in Austin?Yes, there are a number of contractors in the Austin area using our products who offer free on-site inspections for pier and beam foundations. This is a hot market with a lot of order activity at the moment. Homeowners can…