Property grading is a critical step in foundation maintenance because it redirects runoff away from your home instead of allowing it to pool against the exterior walls. By reshaping the soil to slope downhill from the building, we ensure that rain and melted snow roll off the landscape rather than seeping into the foundation or causing soil erosion.
To implement effective grading, we recommend following these practices:
- Use Fill Dirt: Add fill dirt rather than mulch or other lightweight materials to fill holes beside your foundation. Mulch can hold moisture and creep into siding gaps, which may lead to moisture traveling behind sheathing.
- Create a Downward Slope: Ensure the highest point of the soil sits directly against the structure, then pat down the earth to prevent settling. You can verify the angle by placing a level on a straight board set against your siding.
- Maintain the Ground-to-Siding Gap: Once the landscape is sloped, ensure there is a proper vertical gap between the finished grade (soil or mulch) and the bottom edge of your siding. This prevents wet soil from splashing under the siding and damaging wall framing.
For persistent issues or complex projects, we recommend consulting a structural engineer or our Engineering Excellence and Design Support team for site-specific guidance. Installations must always comply with applicable building codes and ICC-ES acceptance criteria.
Related FAQs
-
Can Push Piers be Used in Clay Soil?
Read More »: Can Push Piers be Used in Clay Soil?Yes, push piers can be used in clay soil and are considered an exceptionally effective solution for these conditions. According to the provided content, push pier installation works "exceptionally well" in cohesive clay soils. Key details regarding their use in…
-
What are Concrete Piers for Foundation Repair?
Read More »: What are Concrete Piers for Foundation Repair?Concrete piers are a common foundation repair solution in Texas used to stabilize sinking structures, particularly residential slab-on-grade homes. This method involves using hydraulically driven pre-cast concrete sections to address differential settlement caused by the state’s expansive clay soils. The…
-
What are the Different Types of Foundation Repair Methods?
Read More »: What are the Different Types of Foundation Repair Methods?Based on the provided guide, there are several primary methods used for foundation repair, ranging from deep structural stabilization to surface-level crack sealing: Pier-Based Stabilization Helical Piers: These involve twisting steel shafts with helical plates into the ground. They are…
-
What are D.I.Y. Yard Drainage Methods?
Read More »: What are D.I.Y. Yard Drainage Methods?Homeowners can implement several DIY yard drainage methods to manage surface and subsurface water. These solutions range from simple grading to more complex underground installations: Surface Drainage Methods Swales and Channels: You can dig shallow trenches (6-12 inches deep) along…
-
What are the Most Common Causes of Foundation Failure?
Read More »: What are the Most Common Causes of Foundation Failure?The most common causes of foundation failure are primarily related to soil dynamics and water management challenges. According to industry data, these issues can lead to failure rates as high as 25% in vulnerable regions of the United States. Key…