Property grading is a critical step in foundation maintenance because it redirects runoff away from your home instead of allowing it to pool against the exterior walls. By reshaping the soil to slope downhill from the building, we ensure that rain and melted snow roll off the landscape rather than seeping into the foundation or causing soil erosion.
To implement effective grading, we recommend following these practices:
- Use Fill Dirt: Add fill dirt rather than mulch or other lightweight materials to fill holes beside your foundation. Mulch can hold moisture and creep into siding gaps, which may lead to moisture traveling behind sheathing.
- Create a Downward Slope: Ensure the highest point of the soil sits directly against the structure, then pat down the earth to prevent settling. You can verify the angle by placing a level on a straight board set against your siding.
- Maintain the Ground-to-Siding Gap: Once the landscape is sloped, ensure there is a proper vertical gap between the finished grade (soil or mulch) and the bottom edge of your siding. This prevents wet soil from splashing under the siding and damaging wall framing.
For persistent issues or complex projects, we recommend consulting a structural engineer or our Engineering Excellence and Design Support team for site-specific guidance. Installations must always comply with applicable building codes and ICC-ES acceptance criteria.
Related FAQs
-
How is the Soil Bearing Capacity Determined for Helical Pier Installation?
Read More »: How is the Soil Bearing Capacity Determined for Helical Pier Installation?To ensure long-term structural stability, we determine soil bearing capacity through a combination of upfront geotechnical investigations and real-time field verification during installation. Geotechnical Investigation Before installation begins, we recommend a site-specific geotechnical report to map the soil profile. This…
-
Does the Water Table Level Affect the Soil Bearing Capacity for Helical Piers?
Read More »: Does the Water Table Level Affect the Soil Bearing Capacity for Helical Piers?Yes, groundwater fluctuations are a critical factor in determining soil bearing capacity. A rising water table reduces the effective stress and overall strength of the soil, which in turn diminishes the load capacity of a helical pier. Because groundwater levels…
-
How do You Repair Stair-step Cracks in Brick Veneer?
Read More »: How do You Repair Stair-step Cracks in Brick Veneer?Repairing stair-step cracks in brick veneer requires a professional three-step approach that addresses the root cause of the movement rather than just providing a cosmetic fix. A professional must first determine if the crack is active. This involves using crack…
-
Do Stair-step Cracks Indicate a Sinking Foundation?
Read More »: Do Stair-step Cracks Indicate a Sinking Foundation?Yes, stair-step cracks are considered one of the most significant indicators of differential foundation settlement. These diagonal fractures follow the mortar joints in a zigzag pattern and develop when a foundation settles unevenly, creating stress that the rigid brick veneer…
-
Are Stair-step Cracks in Brick Safe to Ignore?
Read More »: Are Stair-step Cracks in Brick Safe to Ignore?No, stair-step cracks in brick should not be ignored. Because these cracks typically follow mortar joints in a diagonal pattern, they are considered a moderate-to-high severity indicator of differential foundation settlement. Ignoring these signs can lead to progressive structural damage…