The primary difference between foundation settlement (sinking) and foundation heaving is the direction of movement and the underlying environmental cause.
Foundation Settlement (Sinking) Settlement is the downward displacement of a structure’s footing. It typically occurs when the supporting soil can no longer bear the weight of the building. Common causes include:
- Soil compression or poor initial compaction.
- Moisture loss or soil shrinkage during droughts.
- Soil erosion or washouts caused by poor drainage.
- Observable signs: Diagonal cracks near the corners of doors and windows, vertical cracks that are wider at the top, and gaps at baseboards.
Foundation Heaving Heaving is the upward movement of a foundation. This is triggered by external forces pushing the structure from below. Common causes include:
- Expansive clays that swell significantly when they absorb moisture.
- Frost heave, where freezing water in the soil expands and lifts the foundation.
- Root pressure from large trees growing beneath the structure.
- Observable signs: Horizontal wall cracks, floor slab lifting, and inward wall bowing or tilting.
While they move in opposite directions, both conditions can occur in the same structure simultaneously due to seasonal moisture cycles. Because the repair strategies for each differ—ranging from helical piers to plate anchors—a professional engineering assessment is required for an accurate diagnosis.
Related FAQs
-
What is the Relationship between Installation Torque and Soil Bearing Capacity?
Read More »: What is the Relationship between Installation Torque and Soil Bearing Capacity?Installation torque is used as a real-time indicator of soil bearing capacity because the rotational resistance encountered by the helix plates reflects the soil’s shear strength. As the helical pier advances into competent strata, the torque required to turn it…
-
How do Engineers Calculate the Ultimate Geotechnical Capacity of a Helical Pile?
Read More »: How do Engineers Calculate the Ultimate Geotechnical Capacity of a Helical Pile?To calculate the ultimate geotechnical capacity of a helical pile, we utilize two primary methodologies: the individual bearing method and the torque factor method. These approaches allow us to ensure structural loads are successfully transferred to competent bearing strata. $Q_{ult}…
-
Why is a Geotechnical Investigation Necessary to Verify Soil Bearing Capacity?
Read More »: Why is a Geotechnical Investigation Necessary to Verify Soil Bearing Capacity?A geotechnical investigation is essential because it provides the site-specific data required to identify competent bearing strata and accurately size helical pier systems. Relying on general benchmarks is insufficient because actual soil bearing capacity varies significantly based on moisture content,…
-
How is the Soil Bearing Capacity Determined for Helical Pier Installation?
Read More »: How is the Soil Bearing Capacity Determined for Helical Pier Installation?To ensure long-term structural stability, we determine soil bearing capacity through a combination of upfront geotechnical investigations and real-time field verification during installation. Geotechnical Investigation Before installation begins, we recommend a site-specific geotechnical report to map the soil profile. This…
-
Does the Water Table Level Affect the Soil Bearing Capacity for Helical Piers?
Read More »: Does the Water Table Level Affect the Soil Bearing Capacity for Helical Piers?Yes, groundwater fluctuations are a critical factor in determining soil bearing capacity. A rising water table reduces the effective stress and overall strength of the soil, which in turn diminishes the load capacity of a helical pier. Because groundwater levels…