Can Corrosion Cause a Helical Pier to Fail over Time?
Yes, corrosion is a critical factor that can cause helical piers to fail over time. It is an electrochemical reaction—primarily involving moisture and steel—that leads to progressive section loss of the pier shaft.
This process impacts structural integrity in several ways:
- Reduced Load Capacity: As the steel cross-section diminishes due to rust, the pier’s ability to support design loads decreases proportionally. This can lead to differential settlement or, in severe cases, cause the pier to buckle or fail entirely.
- Environmental Acceleration: Corrosion can be accelerated by soils with low electrical resistivity (high chloride, sulfate, or acid content), persistently high moisture levels, or stray DC currents from nearby utility lines and rail systems.
- Triggering Other Failures: A weakened shaft may become more susceptible to negative skin friction, where shifting surrounding soils grip the pier and exert downward pressure that the compromised steel can no longer withstand.
To mitigate these risks, it is essential to use products that meet ICC-ES AC358 standards, which require a minimum 0.002-inch hot-dip galvanized coating. In highly aggressive environments, additional protections like cathodic protection (using sacrificial anodes) may be necessary to ensure the pier’s long-term service life.
Related FAQs
-
Is it Possible to Repair Only a Section of a Failing Seawall, or does the Entire Wall Need Replacement?
Read More »: Is it Possible to Repair Only a Section of a Failing Seawall, or does the Entire Wall Need Replacement?Yes, it is possible to repair only a section of a failing seawall, but whether this is appropriate depends on the extent of the damage. A section repair is often a viable, lower-cost option when damage is limited to 20…
-
Who are the Top Wholesale Distributors of Helical Piers and Push Piers in the Us?
Read More »: Who are the Top Wholesale Distributors of Helical Piers and Push Piers in the Us?Based on the provided content, Helical Technology is the primary top wholesale distributor and manufacturer of helical piers and push piers in the US. They operate as a direct supplier, eliminating middlemen to provide bulk foundation repair supplies at manufacturer…
-
How do I Choose the Right Exterior Remodeling Contractor?
Read More »: How do I Choose the Right Exterior Remodeling Contractor?Choosing the right residential exterior remodeling contractor in Colorado requires a focus on structural expertise due to the state’s expansive soils and freeze-thaw cycles. To select the best professional for your project, follow these essential steps: Identify the Project Scope:…
-
How Deep do Helical Piers Need to be Installed to Reach Load-bearing Soil?
Read More »: How Deep do Helical Piers Need to be Installed to Reach Load-bearing Soil?The installation depth for helical piers is not a fixed number; instead, it is determined by the specific subsurface profile and the need to reach stable, load-bearing strata. According to the provided guide, depth requirements can vary significantly based on…
-
What is Covered in a Helical Pier Installation Training Program?
Read More »: What is Covered in a Helical Pier Installation Training Program?A helical pier installation training program provides a structured path to ensure contractors achieve technical competence, safety, and ICC-ES AC358 building code compliance. The curriculum covers both theoretical and practical components to prepare installers for field operations. Classroom training focuses…