To stabilize a sinking garage foundation, we use Helical Pier Systems to transfer the structural weight of the garage away from failing surface soils and down to deeper, load-bearing strata. This process provides permanent stability where shallow soils can no longer support the structure.
The installation follows a precise professional sequence:
- Site Preparation and Excavation: We expose the existing footing, typically excavating 3 to 4 feet deep to reach the base of the foundation.
- Strategic Positioning: Using compact equipment that requires as little as four feet of headroom, we position the helical lead section under the footing.
- Hydraulic Rotation: We drive the pier shaft into the ground using hydraulic rotation. During this phase, we utilize real-time torque monitoring to verify that each pier reaches the exact engineered load specification required for your specific site.
- Bracket Attachment: Once the pier reaches the target torque value and depth, an underpinning repair bracket is secured to the pier and the existing concrete footing.
- Lift and Load Transfer: Using hydraulic equipment, the foundation is raised back to its correct level according to engineering plans. The structural load is then transferred through the brackets onto the piers.
This method is highly efficient as it avoids the long curing times associated with traditional concrete repairs. Because we adhere to ICC-ES AC358 standards, you can be confident that the repair is both safe and compliant with building codes.
Note: Before beginning, it is essential to consult a structural engineer. Through our network of structural engineers and Engineering Excellence and Design Support, we can help you obtain the required soil evaluations and load calculations to ensure a successful repair.
Related FAQs
-
Can Helical Piers be Used to Stabilize a Leaning or Bowing Seawall?
Read More »: Can Helical Piers be Used to Stabilize a Leaning or Bowing Seawall?Yes, helical piers are an effective solution for stabilizing leaning or bowing seawalls. These systems act as advanced earth anchors that transfer structural loads deep into competent soil, which effectively counteracts lateral soil pressures and hydrostatic forces that typically cause…
-
Is it Possible to Repair Only a Section of a Failing Seawall, or does the Entire Wall Need Replacement?
Read More »: Is it Possible to Repair Only a Section of a Failing Seawall, or does the Entire Wall Need Replacement?Yes, it is possible to repair only a section of a failing seawall, but whether this is appropriate depends on the extent of the damage. A section repair is often a viable, lower-cost option when damage is limited to 20…
-
Who are the Top Wholesale Distributors of Helical Piers and Push Piers in the Us?
Read More »: Who are the Top Wholesale Distributors of Helical Piers and Push Piers in the Us?Based on the provided content, Helical Technology is the primary top wholesale distributor and manufacturer of helical piers and push piers in the US. They operate as a direct supplier, eliminating middlemen to provide bulk foundation repair supplies at manufacturer…
-
How do I Choose the Right Exterior Remodeling Contractor?
Read More »: How do I Choose the Right Exterior Remodeling Contractor?Choosing the right residential exterior remodeling contractor in Colorado requires a focus on structural expertise due to the state’s expansive soils and freeze-thaw cycles. To select the best professional for your project, follow these essential steps: Identify the Project Scope:…
-
How Deep do Helical Piers Need to be Installed to Reach Load-bearing Soil?
Read More »: How Deep do Helical Piers Need to be Installed to Reach Load-bearing Soil?The installation depth for helical piers is not a fixed number; instead, it is determined by the specific subsurface profile and the need to reach stable, load-bearing strata. According to the provided guide, depth requirements can vary significantly based on…