Property grading is a critical step in foundation maintenance because it redirects runoff away from your home instead of allowing it to pool against the exterior walls. By reshaping the soil to slope downhill from the building, we ensure that rain and melted snow roll off the landscape rather than seeping into the foundation or causing soil erosion.
To implement effective grading, we recommend following these practices:
- Use Fill Dirt: Add fill dirt rather than mulch or other lightweight materials to fill holes beside your foundation. Mulch can hold moisture and creep into siding gaps, which may lead to moisture traveling behind sheathing.
- Create a Downward Slope: Ensure the highest point of the soil sits directly against the structure, then pat down the earth to prevent settling. You can verify the angle by placing a level on a straight board set against your siding.
- Maintain the Ground-to-Siding Gap: Once the landscape is sloped, ensure there is a proper vertical gap between the finished grade (soil or mulch) and the bottom edge of your siding. This prevents wet soil from splashing under the siding and damaging wall framing.
For persistent issues or complex projects, we recommend consulting a structural engineer or our Engineering Excellence and Design Support team for site-specific guidance. Installations must always comply with applicable building codes and ICC-ES acceptance criteria.
Related FAQs
-
What are the Standard Methods for Testing Helical Pile Load Capacity?
Read More »: What are the Standard Methods for Testing Helical Pile Load Capacity?Standard methods for testing helical pile load capacity primarily include direct measurement through static load testing and empirical estimation via torque correlation. These methods ensure that installed piles meet design specifications and building code requirements. Static Load Testing (ASTM D1143):…
-
Why is Pile Load Testing Required for Commercial Construction Projects?
Read More »: Why is Pile Load Testing Required for Commercial Construction Projects?For commercial construction projects, pile load testing is a non-negotiable quality assurance requirement primarily driven by safety, design validation, and legal mandates. Key reasons for requiring these tests include: Design Validation: Load testing is the only definitive way to verify…
-
What is the Difference between End-bearing Piles and Friction Piles in Commercial Design?
Read More »: What is the Difference between End-bearing Piles and Friction Piles in Commercial Design?In commercial pile foundation design, the primary difference between end-bearing piles and friction piles lies in how they transfer structural loads to the subsurface soil. The choice between them depends on the site’s soil stratigraphy and the depth of competent…
-
How Much do Helical Piers Cost per Foot Installed?
Read More »: How Much do Helical Piers Cost per Foot Installed?Based on the provided documentation, there is no flat price per foot for helical pier installation. The total cost is determined by several site-specific variables rather than a standard linear measurement. Because every project requires unique structural calculations and soil…
-
How do Foundation Contractors Estimate Helical Pier Project Costs?
Read More »: How do Foundation Contractors Estimate Helical Pier Project Costs?Foundation contractors estimate helical pier project costs by evaluating several site-specific variables rather than using a flat rate. Because every project has unique structural and geological demands, contractors typically use a custom-quote process that considers the following primary cost drivers:…