Property grading is a critical step in foundation maintenance because it redirects runoff away from your home instead of allowing it to pool against the exterior walls. By reshaping the soil to slope downhill from the building, we ensure that rain and melted snow roll off the landscape rather than seeping into the foundation or causing soil erosion.
To implement effective grading, we recommend following these practices:
- Use Fill Dirt: Add fill dirt rather than mulch or other lightweight materials to fill holes beside your foundation. Mulch can hold moisture and creep into siding gaps, which may lead to moisture traveling behind sheathing.
- Create a Downward Slope: Ensure the highest point of the soil sits directly against the structure, then pat down the earth to prevent settling. You can verify the angle by placing a level on a straight board set against your siding.
- Maintain the Ground-to-Siding Gap: Once the landscape is sloped, ensure there is a proper vertical gap between the finished grade (soil or mulch) and the bottom edge of your siding. This prevents wet soil from splashing under the siding and damaging wall framing.
For persistent issues or complex projects, we recommend consulting a structural engineer or our Engineering Excellence and Design Support team for site-specific guidance. Installations must always comply with applicable building codes and ICC-ES acceptance criteria.
Related FAQs
-
What Factors Influence Helical Pier Installation Prices for Foundation Repair?
Read More »: What Factors Influence Helical Pier Installation Prices for Foundation Repair?The cost of helical pier installation for foundation repair is influenced by several technical and site-specific variables. Because every project requires custom structural calculations, most providers avoid flat-rate pricing in favor of project-specific quotes. Key factors influencing the total price…
-
What are the Soil Conditions that Favor Round Shaft Helical Piles?
Read More »: What are the Soil Conditions that Favor Round Shaft Helical Piles?Round shaft helical piles are specifically engineered to perform optimally in demanding geotechnical environments. According to the provided technical guide, the following soil conditions and scenarios favor the use of round shafts: Sandy or Granular Soils: Round shafts are preferred…
-
Is There a Price Difference between Square and Round Shaft Helical Products?
Read More »: Is There a Price Difference between Square and Round Shaft Helical Products?Yes, there are several price and cost differences between square and round shaft helical products, though specific pricing is determined on a project-by-project basis. Key factors influencing the cost difference include: Material Costs: Square shaft helical piles generally require more…
-
How does Shaft Geometry Affect the Bearing Capacity of a Helical Foundation?
Read More »: How does Shaft Geometry Affect the Bearing Capacity of a Helical Foundation?The bearing capacity of a helical foundation is significantly influenced by the shaft’s cross-sectional geometry, which dictates how the pile interacts with different soil types and handles installation torque. Round Shaft Geometry Round shafts feature an axisymmetric geometry that provides…
-
When should You Use Round Shaft Versus Square Shaft Helical Piers?
Read More »: When should You Use Round Shaft Versus Square Shaft Helical Piers?Deciding between round shaft and square shaft helical piers depends on factors such as soil conditions, load requirements, and installation equipment. ### When to Use Round Shaft Helical Piers Round shaft piers are often preferred for challenging commercial and deep…