Property grading is a critical step in foundation maintenance because it redirects runoff away from your home instead of allowing it to pool against the exterior walls. By reshaping the soil to slope downhill from the building, we ensure that rain and melted snow roll off the landscape rather than seeping into the foundation or causing soil erosion.
To implement effective grading, we recommend following these practices:
- Use Fill Dirt: Add fill dirt rather than mulch or other lightweight materials to fill holes beside your foundation. Mulch can hold moisture and creep into siding gaps, which may lead to moisture traveling behind sheathing.
- Create a Downward Slope: Ensure the highest point of the soil sits directly against the structure, then pat down the earth to prevent settling. You can verify the angle by placing a level on a straight board set against your siding.
- Maintain the Ground-to-Siding Gap: Once the landscape is sloped, ensure there is a proper vertical gap between the finished grade (soil or mulch) and the bottom edge of your siding. This prevents wet soil from splashing under the siding and damaging wall framing.
For persistent issues or complex projects, we recommend consulting a structural engineer or our Engineering Excellence and Design Support team for site-specific guidance. Installations must always comply with applicable building codes and ICC-ES acceptance criteria.
Related FAQs
-
Why do some Foundation Experts Recommend Steel Piers over Polyurethane Foam for Structural Issues?
Read More »: Why do some Foundation Experts Recommend Steel Piers over Polyurethane Foam for Structural Issues?We recommend steel piers over polyurethane foam when a permanent, engineered structural solution is required. While polyurethane foam is an effective tool for filling voids and performing minor, non-structural lifts for concrete slabs (typically under 2 inches), it is not…
-
What are the Pros and Cons of Polyurethane Foam Vs. Steel Piering?
Read More »: What are the Pros and Cons of Polyurethane Foam Vs. Steel Piering?When evaluating polyurethane foam vs steel piers, the choice depends on whether you need a temporary surface fix or a permanent structural repair. Polyurethane Foam Injection (Slab Jacking) Steel Piers (Helical or Push Piers) While foam is a suitable tool…
-
When should a Contractor or Homeowner Seek a Professional Foundation Inspection for a New Property?
Read More »: When should a Contractor or Homeowner Seek a Professional Foundation Inspection for a New Property?While all new buildings undergo a period of natural settling within the first few years as soil compresses, you should be concerned enough to seek a professional foundation inspection if you observe signs of differential settlement. Unlike uniform settling, differential…
-
Why might Cracks in Drywall or Masonry Appear in a New House During the First Few Years?
Read More »: Why might Cracks in Drywall or Masonry Appear in a New House During the First Few Years?Cracks in a new home typically fall into two categories: normal cosmetic shrinkage or signs of problematic foundation movement. Most buildings experience a degree of normal settling within the first few years as the soil compresses under the weight of…
-
Do Sticking Doors and Windows in a New Home Always Indicate Significant Foundation Settlement?
Read More »: Do Sticking Doors and Windows in a New Home Always Indicate Significant Foundation Settlement?No, sticking doors and windows in a new home do not always indicate significant foundation settlement. While they are recognized symptoms of structural movement, they can also be caused by several non-structural factors. In many cases, doors and windows may…