Can Corrosion Cause a Helical Pier to Fail over Time?
Yes, corrosion is a critical factor that can cause helical piers to fail over time. It is an electrochemical reaction—primarily involving moisture and steel—that leads to progressive section loss of the pier shaft.
This process impacts structural integrity in several ways:
- Reduced Load Capacity: As the steel cross-section diminishes due to rust, the pier’s ability to support design loads decreases proportionally. This can lead to differential settlement or, in severe cases, cause the pier to buckle or fail entirely.
- Environmental Acceleration: Corrosion can be accelerated by soils with low electrical resistivity (high chloride, sulfate, or acid content), persistently high moisture levels, or stray DC currents from nearby utility lines and rail systems.
- Triggering Other Failures: A weakened shaft may become more susceptible to negative skin friction, where shifting surrounding soils grip the pier and exert downward pressure that the compromised steel can no longer withstand.
To mitigate these risks, it is essential to use products that meet ICC-ES AC358 standards, which require a minimum 0.002-inch hot-dip galvanized coating. In highly aggressive environments, additional protections like cathodic protection (using sacrificial anodes) may be necessary to ensure the pier’s long-term service life.
Related FAQs
-
Is There a Price Difference between Square and Round Shaft Helical Products?
Read More »: Is There a Price Difference between Square and Round Shaft Helical Products?Yes, there are several price and cost differences between square and round shaft helical products, though specific pricing is determined on a project-by-project basis. Key factors influencing the cost difference include: Material Costs: Square shaft helical piles generally require more…
-
How does Shaft Geometry Affect the Bearing Capacity of a Helical Foundation?
Read More »: How does Shaft Geometry Affect the Bearing Capacity of a Helical Foundation?The bearing capacity of a helical foundation is significantly influenced by the shaft’s cross-sectional geometry, which dictates how the pile interacts with different soil types and handles installation torque. Round Shaft Geometry Round shafts feature an axisymmetric geometry that provides…
-
When should You Use Round Shaft Versus Square Shaft Helical Piers?
Read More »: When should You Use Round Shaft Versus Square Shaft Helical Piers?Deciding between round shaft and square shaft helical piers depends on factors such as soil conditions, load requirements, and installation equipment. ### When to Use Round Shaft Helical Piers Round shaft piers are often preferred for challenging commercial and deep…
-
What Specialized Hydraulic Equipment is Required for Helical Pier Installation?
Read More »: What Specialized Hydraulic Equipment is Required for Helical Pier Installation?Installing helical piers requires a specialized hydraulic system designed to provide the rotational force necessary to screw the steel shafts into the ground. The core equipment components include: Hydraulic Torque Motor: This is the central component, typically sized between 5,000…
-
How is Installation Torque Monitored to Ensure Structural Integrity?
Read More »: How is Installation Torque Monitored to Ensure Structural Integrity?Installation torque is monitored in real time to verify that each helical pier achieves the required load-bearing capacity and structural integrity. The monitoring process involves several technical steps: Measurement Tools: A pressure transducer is placed inline with the hydraulic system.…