To stabilize a sinking garage foundation, we use Helical Pier Systems to transfer the structural weight of the garage away from failing surface soils and down to deeper, load-bearing strata. This process provides permanent stability where shallow soils can no longer support the structure.
The installation follows a precise professional sequence:
- Site Preparation and Excavation: We expose the existing footing, typically excavating 3 to 4 feet deep to reach the base of the foundation.
- Strategic Positioning: Using compact equipment that requires as little as four feet of headroom, we position the helical lead section under the footing.
- Hydraulic Rotation: We drive the pier shaft into the ground using hydraulic rotation. During this phase, we utilize real-time torque monitoring to verify that each pier reaches the exact engineered load specification required for your specific site.
- Bracket Attachment: Once the pier reaches the target torque value and depth, an underpinning repair bracket is secured to the pier and the existing concrete footing.
- Lift and Load Transfer: Using hydraulic equipment, the foundation is raised back to its correct level according to engineering plans. The structural load is then transferred through the brackets onto the piers.
This method is highly efficient as it avoids the long curing times associated with traditional concrete repairs. Because we adhere to ICC-ES AC358 standards, you can be confident that the repair is both safe and compliant with building codes.
Note: Before beginning, it is essential to consult a structural engineer. Through our network of structural engineers and Engineering Excellence and Design Support, we can help you obtain the required soil evaluations and load calculations to ensure a successful repair.
Related FAQs
-
Why do some Foundation Experts Recommend Steel Piers over Polyurethane Foam for Structural Issues?
Read More »: Why do some Foundation Experts Recommend Steel Piers over Polyurethane Foam for Structural Issues?We recommend steel piers over polyurethane foam when a permanent, engineered structural solution is required. While polyurethane foam is an effective tool for filling voids and performing minor, non-structural lifts for concrete slabs (typically under 2 inches), it is not…
-
What are the Pros and Cons of Polyurethane Foam Vs. Steel Piering?
Read More »: What are the Pros and Cons of Polyurethane Foam Vs. Steel Piering?When evaluating polyurethane foam vs steel piers, the choice depends on whether you need a temporary surface fix or a permanent structural repair. Polyurethane Foam Injection (Slab Jacking) Steel Piers (Helical or Push Piers) While foam is a suitable tool…
-
When should a Contractor or Homeowner Seek a Professional Foundation Inspection for a New Property?
Read More »: When should a Contractor or Homeowner Seek a Professional Foundation Inspection for a New Property?While all new buildings undergo a period of natural settling within the first few years as soil compresses, you should be concerned enough to seek a professional foundation inspection if you observe signs of differential settlement. Unlike uniform settling, differential…
-
Why might Cracks in Drywall or Masonry Appear in a New House During the First Few Years?
Read More »: Why might Cracks in Drywall or Masonry Appear in a New House During the First Few Years?Cracks in a new home typically fall into two categories: normal cosmetic shrinkage or signs of problematic foundation movement. Most buildings experience a degree of normal settling within the first few years as the soil compresses under the weight of…
-
Do Sticking Doors and Windows in a New Home Always Indicate Significant Foundation Settlement?
Read More »: Do Sticking Doors and Windows in a New Home Always Indicate Significant Foundation Settlement?No, sticking doors and windows in a new home do not always indicate significant foundation settlement. While they are recognized symptoms of structural movement, they can also be caused by several non-structural factors. In many cases, doors and windows may…