How Deep do Helical Piers Need to be Installed to Reach Load-bearing Soil?

The installation depth for helical piers is not a fixed number; instead, it is determined by the specific subsurface profile and the need to reach stable, load-bearing strata. According to the provided guide, depth requirements can vary significantly based on soil type:

• Soft Clay: Approximately 5–15 feet.
• Silty Clay or Clay Loam: Approximately 8–20 feet.
• Loose to Dense Sand: Approximately 10–25 feet.
• Gravel or Sandy Gravel: Approximately 12–30 feet.

### Determining the Correct Depth To ensure the pier has reached competent soil, contractors use two primary methods:

1. Geotechnical Investigation: Soil borings and test pits identify the depth of the load-bearing strata before installation begins.
2. Real-Time Torque Monitoring: As the pier is screwed into the ground, a hydraulic torque motor measures resistance. This torque reading is correlated to soil capacity using ICC-ES AC358 formulas. The installation continues—often using extensions—until the required torque and design depth are achieved.

At a minimum, piers are typically installed beyond the frost line to prevent movement caused by freeze-thaw cycles.