Property grading is a critical step in foundation maintenance because it redirects runoff away from your home instead of allowing it to pool against the exterior walls. By reshaping the soil to slope downhill from the building, we ensure that rain and melted snow roll off the landscape rather than seeping into the foundation or causing soil erosion.
To implement effective grading, we recommend following these practices:
- Use Fill Dirt: Add fill dirt rather than mulch or other lightweight materials to fill holes beside your foundation. Mulch can hold moisture and creep into siding gaps, which may lead to moisture traveling behind sheathing.
- Create a Downward Slope: Ensure the highest point of the soil sits directly against the structure, then pat down the earth to prevent settling. You can verify the angle by placing a level on a straight board set against your siding.
- Maintain the Ground-to-Siding Gap: Once the landscape is sloped, ensure there is a proper vertical gap between the finished grade (soil or mulch) and the bottom edge of your siding. This prevents wet soil from splashing under the siding and damaging wall framing.
For persistent issues or complex projects, we recommend consulting a structural engineer or our Engineering Excellence and Design Support team for site-specific guidance. Installations must always comply with applicable building codes and ICC-ES acceptance criteria.
Related FAQs
-
How does the Choice between Helical Piles and Traditional Concrete Piering Methods Affect Overall Project Costs?
Read More »: How does the Choice between Helical Piles and Traditional Concrete Piering Methods Affect Overall Project Costs?The choice between helical piles and traditional concrete piering significantly impacts overall project costs through differences in materials, labor, and installation speed. While the two methods address similar structural issues, their financial profiles vary in several key areas: Related FAQs
-
Can a Foundation Experience both Settlement and Heaving at Once?
Read More »: Can a Foundation Experience both Settlement and Heaving at Once?Yes, a foundation can experience both settlement and heaving simultaneously or sequentially over time. This dual movement is particularly common in regions with expansive clay soils or significant seasonal moisture variations. According to the provided technical guide, this combined movement…
-
Are Repair Methods Different for Foundation Heaving Versus Settlement?
Read More »: Are Repair Methods Different for Foundation Heaving Versus Settlement?Yes, while some overlapping technologies are used, the repair approaches for foundation settlement and heaving are distinct and must be tailored to the specific direction and cause of movement. Repair Approaches for Settlement Settlement repairs focus on transferring the weight…
-
What is the Difference between Foundation Sinking and Foundation Heaving?
Read More »: What is the Difference between Foundation Sinking and Foundation Heaving?The primary difference between foundation settlement (sinking) and foundation heaving is the direction of movement and the underlying environmental cause. Foundation Settlement (Sinking) Settlement is the downward displacement of a structure’s footing. It typically occurs when the supporting soil can…
-
Does Expansive Clay Cause More Heaving or Settlement in the Front Range?
Read More »: Does Expansive Clay Cause More Heaving or Settlement in the Front Range?In the Front Range, expansive clay is a significant driver of foundation issues because it causes both heaving and settlement through a continuous shrink-swell cycle. According to the provided content, the region’s clay-rich soils undergo dramatic volume changes based on…