The answer depends on the specific application and soil conditions, as both round and square shafts offer distinct advantages in torsional strength:
- Round Shafts: These are noted for their superior torsional performance due to an axisymmetric geometry. This circular cross-section distributes shear stress evenly around the perimeter, providing a higher torsional capacity per unit area. This makes them highly effective in dense or cohesive soils, significantly reducing the risk of the shaft twisting during high-torque, deep commercial installations.
- Square Shafts: These are recommended for heavy commercial and industrial scenarios where axial loads exceed 100 kips. Square shaft leads can provide superior torsional strength compared to round shaft leads of equivalent steel weight. This prevents shaft twist when encountering shallow obstructions or extremely dense soils.
However, in demanding installations like weathered rock or dense till, square shafts may experience localized stress risers at their corners, which can initiate material distress earlier than round shafts.
Ultimately, selecting the right shaft requires a geotechnical analysis, as round shafts provide more predictable load-bearing performance in high-torque settings, while square shafts are engineered for the highest capacity structural requirements.
Related FAQs
-
Why do some Foundation Experts Recommend Steel Piers over Polyurethane Foam for Structural Issues?
Read More »: Why do some Foundation Experts Recommend Steel Piers over Polyurethane Foam for Structural Issues?We recommend steel piers over polyurethane foam when a permanent, engineered structural solution is required. While polyurethane foam is an effective tool for filling voids and performing minor, non-structural lifts for concrete slabs (typically under 2 inches), it is not…
-
What are the Pros and Cons of Polyurethane Foam Vs. Steel Piering?
Read More »: What are the Pros and Cons of Polyurethane Foam Vs. Steel Piering?When evaluating polyurethane foam vs steel piers, the choice depends on whether you need a temporary surface fix or a permanent structural repair. Polyurethane Foam Injection (Slab Jacking) Steel Piers (Helical or Push Piers) While foam is a suitable tool…
-
When should a Contractor or Homeowner Seek a Professional Foundation Inspection for a New Property?
Read More »: When should a Contractor or Homeowner Seek a Professional Foundation Inspection for a New Property?While all new buildings undergo a period of natural settling within the first few years as soil compresses, you should be concerned enough to seek a professional foundation inspection if you observe signs of differential settlement. Unlike uniform settling, differential…
-
Why might Cracks in Drywall or Masonry Appear in a New House During the First Few Years?
Read More »: Why might Cracks in Drywall or Masonry Appear in a New House During the First Few Years?Cracks in a new home typically fall into two categories: normal cosmetic shrinkage or signs of problematic foundation movement. Most buildings experience a degree of normal settling within the first few years as the soil compresses under the weight of…
-
Do Sticking Doors and Windows in a New Home Always Indicate Significant Foundation Settlement?
Read More »: Do Sticking Doors and Windows in a New Home Always Indicate Significant Foundation Settlement?No, sticking doors and windows in a new home do not always indicate significant foundation settlement. While they are recognized symptoms of structural movement, they can also be caused by several non-structural factors. In many cases, doors and windows may…