Polyurethane foam is generally not recommended for structural foundation stabilization. While it is an effective tool for slab jacking—which involves lifting non-structural concrete like sidewalks, driveways, or interior slabs with less than 2 inches of settlement—it lacks the capacity to support the perimeter foundations or load-bearing walls of a settling home.
For a permanent solution, we utilize foundation underpinning via steel pier systems. The primary differences include:
- Load-Bearing Capacity: Polyurethane foam is typically limited to lighter loads (under 20 tons). In contrast, our Helical Piers provide a load-bearing capacity that can exceed 100 tons per pier.
- Depth and Stability: Foam injection is a shallow correction that may degrade over time, especially in expansive clay or high-moisture soils. Our steel piers transfer the building’s load past unstable surface soils down to competent load-bearing strata or bedrock.
- Engineering Standards: Our Helical Pier Systems and Push Piers are ICC and ISO Certified products with ICC-ES documentation, ensuring they meet the highest industry standards for permanent structural support.
Because every project has unique soil conditions and structural requirements, we recommend a site-specific geotechnical evaluation. We provide Engineering Excellence and Design Support through our network of structural engineers to ensure your repair is built to last.
Note: Consult a structural engineer or our engineering team for project-specific design and installation guidance. Installations must comply with applicable building codes and ICC-ES acceptance criteria (AC358).
Related FAQs
-
How do You Perform a Static Load Test on a Helical Pier?
Read More »: How do You Perform a Static Load Test on a Helical Pier?Performing a static load test on a helical pier (or pile) involves a systematic process following the ASTM D1143 standard to directly measure axial capacity. The procedure is broken down into setup, execution, and interpretation: ### 1. Pre-Test Setup Location…
-
What is the Difference between Static and Dynamic Pile Load Testing?
Read More »: What is the Difference between Static and Dynamic Pile Load Testing?The primary difference between static and dynamic pile load testing lies in how the force is applied, the duration of the test, and the level of accuracy provided. While both methods are used to verify the capacity of helical piles,…
-
How do You Interpret Torque-to-capacity Ratios During Installation?
Read More »: How do You Interpret Torque-to-capacity Ratios During Installation?Interpreting torque-to-capacity ratios involves using an empirical relationship to estimate a helical pile’s ultimate capacity during the installation process. This is known as the Torque Correlation Method. ### The Correlation Formula The primary calculation used for this interpretation is Qu…
-
What are the Standard Methods for Testing Helical Pile Load Capacity?
Read More »: What are the Standard Methods for Testing Helical Pile Load Capacity?Standard methods for testing helical pile load capacity primarily include direct measurement through static load testing and empirical estimation via torque correlation. These methods ensure that installed piles meet design specifications and building code requirements. Static Load Testing (ASTM D1143):…
-
Why is Pile Load Testing Required for Commercial Construction Projects?
Read More »: Why is Pile Load Testing Required for Commercial Construction Projects?For commercial construction projects, pile load testing is a non-negotiable quality assurance requirement primarily driven by safety, design validation, and legal mandates. Key reasons for requiring these tests include: Design Validation: Load testing is the only definitive way to verify…