Polyurethane foam is generally not recommended for structural foundation stabilization. While it is an effective tool for slab jacking—which involves lifting non-structural concrete like sidewalks, driveways, or interior slabs with less than 2 inches of settlement—it lacks the capacity to support the perimeter foundations or load-bearing walls of a settling home.
For a permanent solution, we utilize foundation underpinning via steel pier systems. The primary differences include:
- Load-Bearing Capacity: Polyurethane foam is typically limited to lighter loads (under 20 tons). In contrast, our Helical Piers provide a load-bearing capacity that can exceed 100 tons per pier.
- Depth and Stability: Foam injection is a shallow correction that may degrade over time, especially in expansive clay or high-moisture soils. Our steel piers transfer the building’s load past unstable surface soils down to competent load-bearing strata or bedrock.
- Engineering Standards: Our Helical Pier Systems and Push Piers are ICC and ISO Certified products with ICC-ES documentation, ensuring they meet the highest industry standards for permanent structural support.
Because every project has unique soil conditions and structural requirements, we recommend a site-specific geotechnical evaluation. We provide Engineering Excellence and Design Support through our network of structural engineers to ensure your repair is built to last.
Note: Consult a structural engineer or our engineering team for project-specific design and installation guidance. Installations must comply with applicable building codes and ICC-ES acceptance criteria (AC358).
Related FAQs
-
What are the Early Signs of Settlement in a Failing Pile Foundation?
Read More »: What are the Early Signs of Settlement in a Failing Pile Foundation?Detecting the early signs of a failing pile foundation, specifically due to differential settlement, is critical for preventing irreversible structural distress. These signs often manifest in both the interior and exterior of a building as the foundation shifts unevenly. According…
-
What are the Benefits of Hiring Local Concrete Contractors in Denver, Co?
Read More »: What are the Benefits of Hiring Local Concrete Contractors in Denver, Co?Hiring local concrete contractors in Denver, Colorado, provides several distinct advantages due to their specialized knowledge of the region’s unique geographical and regulatory environment. The primary benefits include: Local Expertise and Geology Knowledge Denver contractors are uniquely experienced in addressing…
-
How do I Know if I Need Foundation Repairs?
Read More »: How do I Know if I Need Foundation Repairs?Determining if you need foundation repairs involves looking for specific physical warning signs and conducting professional assessments. Common indicators of foundation trouble include uneven or sloping floors, doors that stick or fail to open properly, and visible cracks in walls.…
-
How do I Use a Wire Crimping Tool?
Read More »: How do I Use a Wire Crimping Tool?To use a wire crimping tool effectively for foundation repair or electrical monitoring systems, follow these professional steps based on ICC-approved standards: Preparation: Set up a well-lit, ventilated workspace. Inspect your manual wire crimper or hydraulic tool for damage or…
-
How do I Choose the Right Crimping Tool?
Read More »: How do I Choose the Right Crimping Tool?Choosing the right crimping tool depends primarily on the scale of your project and the specific electrical demands of the application. According to the guide, you should consider the following factors: Project Scale and Load: Manual wire crimpers or crimping…