Installing helical piers on an existing residential foundation involves a precise, torque-driven sequence designed to transfer structural weight to stable soil. The process can be performed from either the exterior or interior of the building, depending on site accessibility.
### Step-by-Step Installation Procedure
- Site Preparation: The work area is cleared of debris, and underground utilities are marked. For exterior work, a trench is excavated roughly 3 to 4 feet deep to reach the footing base.
- Pier Positioning: The lead section of the helical pier is positioned at a specific load-transfer point beneath the existing foundation footing.
- Driving to Depth: Using a hydraulic drive head, the pier is rotated into the ground. Installers monitor torque readings in real-time to ensure the pier reaches competent soil. If additional depth is required, extension sections are added until target torque and depth are achieved.
- Bracket Attachment: A heavy-duty repair bracket is secured to the pier shaft and attached directly to the existing foundation. This creates the mechanical connection for load transfer.
- Load Transfer and Backfill: The structural load is shifted from unstable surface soil to the pier. Any voids are filled, and the excavation site is backfilled and compacted.
### Installation Considerations
- Exterior Installation: Offers unrestricted overhead space and allows for full-size hydraulic equipment, though it requires more landscape disruption.
- Interior Installation: Ideal when exterior access is blocked. This requires compact power units and may use low-profile tooling that can operate in areas with as little as 4 feet of headroom.
- Quality Assurance: Installations must comply with ICC-ES AC358 standards. Torque-to-capacity correlations are used to verify that every pier meets the structural design requirements specified by an engineer.
Related FAQs
-
Why is Uplift Resistance Critical for Ground Mount Solar Arrays?
Read More »: Why is Uplift Resistance Critical for Ground Mount Solar Arrays?Uplift resistance is a critical design parameter for ground mount solar arrays because these structures are subjected to significant wind uplift forces. Without sufficient resistance, the upward pressure from wind can exceed the vertical load capacity of the foundation, leading…
-
When is a Building Permit Required for a Deck in Omaha?
Read More »: When is a Building Permit Required for a Deck in Omaha?In Omaha and the Eastern Nebraska region, a building permit is specifically required for any deck project that meets either of the following criteria: When applying for a permit in this region, you should be prepared for the following regulatory…
-
What are the Frost Depth Requirements for Deck Footings in Nebraska?
Read More »: What are the Frost Depth Requirements for Deck Footings in Nebraska?In Nebraska, frost depth requirements for deck footings vary by region and local jurisdiction to prevent structural damage caused by frost heave. General requirements across the state include: Compliance with these depths is mandatory under the Nebraska Building Code and…
-
Does a Deck Contractor Handle the Permitting Process for Me?
Read More »: Does a Deck Contractor Handle the Permitting Process for Me?In Nebraska, deck contractors play a vital role in managing the permitting process to ensure projects meet local regulations and avoid costly delays. While the specific level of involvement can vary, experienced contractors typically handle several key aspects of the…
-
What Happens if I Build a Deck without a Permit in Nebraska?
Read More »: What Happens if I Build a Deck without a Permit in Nebraska?Building a deck without a permit in Nebraska can lead to significant safety, financial, and legal issues. Because deck building permits are mandatory for most residential projects in the state, failing to secure one means your project is not in…