Installing helical piers on an existing residential foundation involves a precise, torque-driven sequence designed to transfer structural weight to stable soil. The process can be performed from either the exterior or interior of the building, depending on site accessibility.
### Step-by-Step Installation Procedure
- Site Preparation: The work area is cleared of debris, and underground utilities are marked. For exterior work, a trench is excavated roughly 3 to 4 feet deep to reach the footing base.
- Pier Positioning: The lead section of the helical pier is positioned at a specific load-transfer point beneath the existing foundation footing.
- Driving to Depth: Using a hydraulic drive head, the pier is rotated into the ground. Installers monitor torque readings in real-time to ensure the pier reaches competent soil. If additional depth is required, extension sections are added until target torque and depth are achieved.
- Bracket Attachment: A heavy-duty repair bracket is secured to the pier shaft and attached directly to the existing foundation. This creates the mechanical connection for load transfer.
- Load Transfer and Backfill: The structural load is shifted from unstable surface soil to the pier. Any voids are filled, and the excavation site is backfilled and compacted.
### Installation Considerations
- Exterior Installation: Offers unrestricted overhead space and allows for full-size hydraulic equipment, though it requires more landscape disruption.
- Interior Installation: Ideal when exterior access is blocked. This requires compact power units and may use low-profile tooling that can operate in areas with as little as 4 feet of headroom.
- Quality Assurance: Installations must comply with ICC-ES AC358 standards. Torque-to-capacity correlations are used to verify that every pier meets the structural design requirements specified by an engineer.
Related FAQs
-
How do You Perform a Static Load Test on a Helical Pier?
Read More »: How do You Perform a Static Load Test on a Helical Pier?Performing a static load test on a helical pier (or pile) involves a systematic process following the ASTM D1143 standard to directly measure axial capacity. The procedure is broken down into setup, execution, and interpretation: ### 1. Pre-Test Setup Location…
-
What is the Difference between Static and Dynamic Pile Load Testing?
Read More »: What is the Difference between Static and Dynamic Pile Load Testing?The primary difference between static and dynamic pile load testing lies in how the force is applied, the duration of the test, and the level of accuracy provided. While both methods are used to verify the capacity of helical piles,…
-
How do You Interpret Torque-to-capacity Ratios During Installation?
Read More »: How do You Interpret Torque-to-capacity Ratios During Installation?Interpreting torque-to-capacity ratios involves using an empirical relationship to estimate a helical pile’s ultimate capacity during the installation process. This is known as the Torque Correlation Method. ### The Correlation Formula The primary calculation used for this interpretation is Qu…
-
What are the Standard Methods for Testing Helical Pile Load Capacity?
Read More »: What are the Standard Methods for Testing Helical Pile Load Capacity?Standard methods for testing helical pile load capacity primarily include direct measurement through static load testing and empirical estimation via torque correlation. These methods ensure that installed piles meet design specifications and building code requirements. Static Load Testing (ASTM D1143):…
-
Why is Pile Load Testing Required for Commercial Construction Projects?
Read More »: Why is Pile Load Testing Required for Commercial Construction Projects?For commercial construction projects, pile load testing is a non-negotiable quality assurance requirement primarily driven by safety, design validation, and legal mandates. Key reasons for requiring these tests include: Design Validation: Load testing is the only definitive way to verify…