While all new buildings undergo a period of natural settling within the first few years as soil compresses, you should be concerned enough to seek a professional foundation inspection if you observe signs of differential settlement. Unlike uniform settling, differential movement can threaten the structural integrity of a new property.
We recommend contacting a professional immediately if you notice any of the following red flags:
- Significant Cracking: Any cracks in foundation walls, floors, or drywall that exceed 1/8 inch in width. You should be particularly concerned by vertical, diagonal, or stair-step cracks, as well as cracks that widen or expand over time.
- Functional Distortion: Doors and windows that suddenly stick, fail to latch, or no longer close smoothly, indicating that the frames have become misaligned due to structural shifting.
- Visible Gaps: New gaps forming around exterior door or window frames, or instances where the brick veneer and siding are separating from the structure.
- Floor and Wall Issues: Noticeably sloping or uneven floors, bulging or leaning walls, or trim and molding that is separating from the ceiling or wall.
For homes built within the last five years, these indicators often suggest that the underlying soils have not reached equilibrium or that there is inadequate footing support. Only a licensed structural engineer can accurately differentiate between harmless cosmetic shrinkage and developing structural risks.
If an inspection confirms that stabilization is required, we offer a range of ICC- and ISO-certified foundation repair solutions, including helical pier systems and push piers. We also provide Engineering Excellence and Design Support to ensure repairs comply with all applicable building codes and ICC-ES acceptance criteria.
Consult a structural engineer or the manufacturer’s engineering team for project-specific design and installation guidance. Products are certified to ICC/ISO where indicated—installations must comply with applicable building codes and ICC-ES acceptance criteria (AC358).
Related FAQs
-
How do You Perform a Static Load Test on a Helical Pier?
Read More »: How do You Perform a Static Load Test on a Helical Pier?Performing a static load test on a helical pier (or pile) involves a systematic process following the ASTM D1143 standard to directly measure axial capacity. The procedure is broken down into setup, execution, and interpretation: ### 1. Pre-Test Setup Location…
-
What is the Difference between Static and Dynamic Pile Load Testing?
Read More »: What is the Difference between Static and Dynamic Pile Load Testing?The primary difference between static and dynamic pile load testing lies in how the force is applied, the duration of the test, and the level of accuracy provided. While both methods are used to verify the capacity of helical piles,…
-
How do You Interpret Torque-to-capacity Ratios During Installation?
Read More »: How do You Interpret Torque-to-capacity Ratios During Installation?Interpreting torque-to-capacity ratios involves using an empirical relationship to estimate a helical pile’s ultimate capacity during the installation process. This is known as the Torque Correlation Method. ### The Correlation Formula The primary calculation used for this interpretation is Qu…
-
What are the Standard Methods for Testing Helical Pile Load Capacity?
Read More »: What are the Standard Methods for Testing Helical Pile Load Capacity?Standard methods for testing helical pile load capacity primarily include direct measurement through static load testing and empirical estimation via torque correlation. These methods ensure that installed piles meet design specifications and building code requirements. Static Load Testing (ASTM D1143):…
-
Why is Pile Load Testing Required for Commercial Construction Projects?
Read More »: Why is Pile Load Testing Required for Commercial Construction Projects?For commercial construction projects, pile load testing is a non-negotiable quality assurance requirement primarily driven by safety, design validation, and legal mandates. Key reasons for requiring these tests include: Design Validation: Load testing is the only definitive way to verify…