While all new buildings undergo a period of natural settling within the first few years as soil compresses, you should be concerned enough to seek a professional foundation inspection if you observe signs of differential settlement. Unlike uniform settling, differential movement can threaten the structural integrity of a new property.
We recommend contacting a professional immediately if you notice any of the following red flags:
- Significant Cracking: Any cracks in foundation walls, floors, or drywall that exceed 1/8 inch in width. You should be particularly concerned by vertical, diagonal, or stair-step cracks, as well as cracks that widen or expand over time.
- Functional Distortion: Doors and windows that suddenly stick, fail to latch, or no longer close smoothly, indicating that the frames have become misaligned due to structural shifting.
- Visible Gaps: New gaps forming around exterior door or window frames, or instances where the brick veneer and siding are separating from the structure.
- Floor and Wall Issues: Noticeably sloping or uneven floors, bulging or leaning walls, or trim and molding that is separating from the ceiling or wall.
For homes built within the last five years, these indicators often suggest that the underlying soils have not reached equilibrium or that there is inadequate footing support. Only a licensed structural engineer can accurately differentiate between harmless cosmetic shrinkage and developing structural risks.
If an inspection confirms that stabilization is required, we offer a range of ICC- and ISO-certified foundation repair solutions, including helical pier systems and push piers. We also provide Engineering Excellence and Design Support to ensure repairs comply with all applicable building codes and ICC-ES acceptance criteria.
Consult a structural engineer or the manufacturer’s engineering team for project-specific design and installation guidance. Products are certified to ICC/ISO where indicated—installations must comply with applicable building codes and ICC-ES acceptance criteria (AC358).
Related FAQs
-
What are the Asce 7 Requirements for Solar Pile Uplift?
Read More »: What are the Asce 7 Requirements for Solar Pile Uplift?According to the provided technical guide, the ASCE 7-22 standards establish specific safety factors and load combinations to determine the required uplift resistance capacity for helical piers in solar applications. Key requirements include: Engineers must use these factored loads in…
-
How do I Test for Solar Foundation Uplift Resistance on Site?
Read More »: How do I Test for Solar Foundation Uplift Resistance on Site?Testing for solar foundation uplift resistance on site involves a combination of real-time installation monitoring and physical verification tests to ensure the foundation can withstand significant wind loads. According to the provided guide, the following methods are used to test…
-
Does Helix Diameter Affect Uplift Resistance in Sandy Soils?
Read More »: Does Helix Diameter Affect Uplift Resistance in Sandy Soils?Yes, helix diameter significantly affects uplift resistance capacity. According to the provided technical guide, the dimensions and configuration of the helix plates are critical factors in determining how much upward force a pile can support. Key ways helix diameter influences…
-
What Factors Influence the Uplift Capacity of a Helical Pier?
Read More »: What Factors Influence the Uplift Capacity of a Helical Pier?The uplift resistance capacity of a helical pier is influenced by several geotechnical, structural, and mechanical factors. According to the provided guide, these include: Related FAQs
-
How is Uplift Resistance Capacity Calculated for Solar Helical Piles?
Read More »: How is Uplift Resistance Capacity Calculated for Solar Helical Piles?The uplift resistance capacity for solar helical piles is calculated by determining the maximum upward load a pile can support before failure. This is primarily established through two engineering methods: Engineers calculate the total capacity by summing the helix bearing…