We recommend steel piers over polyurethane foam when a permanent, engineered structural solution is required. While polyurethane foam is an effective tool for filling voids and performing minor, non-structural lifts for concrete slabs (typically under 2 inches), it is not a permanent fix for structural foundation settlement.
Our advanced earth anchoring systems are designed to address the root cause of settlement by transferring building loads past unstable surface soils down to competent load-bearing strata or bedrock. There are three primary reasons why our engineering team and network of structural engineers prefer steel systems:
- Superior Load-Bearing Capacity: Steel helical or push piers can support loads exceeding 100 tons per pier. In contrast, polyurethane foam is generally limited to lifting slabs and supporting lighter loads, typically under 20 tons.
- Stability in Expansive or Wet Soils: In environments with high moisture or expansive clay, shallow solutions like foam can be compromised by soil movement. Steel piers bypass these active zones entirely, providing long-term durability that foam cannot match.
- Permanent Underpinning: Unlike foam, which may degrade or require re-application over time, our ICC and ISO Certified products provide a permanent foundation repair solution. Steel systems are the industry standard for perimeter foundations, load-bearing walls, and commercial columns.
Because every project presents unique geotechnical challenges, we provide Engineering Excellence and Design Support to ensure the right system is utilized.
Consult a structural engineer or the manufacturer’s engineering team for project-specific design and installation guidance. Products are certified to ICC/ISO where indicated — installations must comply with applicable building codes and ICC-ES acceptance criteria (AC358).
Related FAQs
-
What is the Difference between End-bearing Piles and Friction Piles in Commercial Design?
Read More »: What is the Difference between End-bearing Piles and Friction Piles in Commercial Design?In commercial pile foundation design, the primary difference between end-bearing piles and friction piles lies in how they transfer structural loads to the subsurface soil. The choice between them depends on the site’s soil stratigraphy and the depth of competent…
-
How Much do Helical Piers Cost per Foot Installed?
Read More »: How Much do Helical Piers Cost per Foot Installed?Based on the provided documentation, there is no flat price per foot for helical pier installation. The total cost is determined by several site-specific variables rather than a standard linear measurement. Because every project requires unique structural calculations and soil…
-
How do Foundation Contractors Estimate Helical Pier Project Costs?
Read More »: How do Foundation Contractors Estimate Helical Pier Project Costs?Foundation contractors estimate helical pier project costs by evaluating several site-specific variables rather than using a flat rate. Because every project has unique structural and geological demands, contractors typically use a custom-quote process that considers the following primary cost drivers:…
-
What Factors Influence Helical Pier Installation Prices for Foundation Repair?
Read More »: What Factors Influence Helical Pier Installation Prices for Foundation Repair?The cost of helical pier installation for foundation repair is influenced by several technical and site-specific variables. Because every project requires custom structural calculations, most providers avoid flat-rate pricing in favor of project-specific quotes. Key factors influencing the total price…
-
What are the Soil Conditions that Favor Round Shaft Helical Piles?
Read More »: What are the Soil Conditions that Favor Round Shaft Helical Piles?Round shaft helical piles are specifically engineered to perform optimally in demanding geotechnical environments. According to the provided technical guide, the following soil conditions and scenarios favor the use of round shafts: Sandy or Granular Soils: Round shafts are preferred…