We recommend steel piers over polyurethane foam when a permanent, engineered structural solution is required. While polyurethane foam is an effective tool for filling voids and performing minor, non-structural lifts for concrete slabs (typically under 2 inches), it is not a permanent fix for structural foundation settlement.
Our advanced earth anchoring systems are designed to address the root cause of settlement by transferring building loads past unstable surface soils down to competent load-bearing strata or bedrock. There are three primary reasons why our engineering team and network of structural engineers prefer steel systems:
- Superior Load-Bearing Capacity: Steel helical or push piers can support loads exceeding 100 tons per pier. In contrast, polyurethane foam is generally limited to lifting slabs and supporting lighter loads, typically under 20 tons.
- Stability in Expansive or Wet Soils: In environments with high moisture or expansive clay, shallow solutions like foam can be compromised by soil movement. Steel piers bypass these active zones entirely, providing long-term durability that foam cannot match.
- Permanent Underpinning: Unlike foam, which may degrade or require re-application over time, our ICC and ISO Certified products provide a permanent foundation repair solution. Steel systems are the industry standard for perimeter foundations, load-bearing walls, and commercial columns.
Because every project presents unique geotechnical challenges, we provide Engineering Excellence and Design Support to ensure the right system is utilized.
Consult a structural engineer or the manufacturer’s engineering team for project-specific design and installation guidance. Products are certified to ICC/ISO where indicated — installations must comply with applicable building codes and ICC-ES acceptance criteria (AC358).
Related FAQs
-
What are the Early Signs of Settlement in a Failing Pile Foundation?
Read More »: What are the Early Signs of Settlement in a Failing Pile Foundation?Detecting the early signs of a failing pile foundation, specifically due to differential settlement, is critical for preventing irreversible structural distress. These signs often manifest in both the interior and exterior of a building as the foundation shifts unevenly. According…
-
What are the Benefits of Hiring Local Concrete Contractors in Denver, Co?
Read More »: What are the Benefits of Hiring Local Concrete Contractors in Denver, Co?Hiring local concrete contractors in Denver, Colorado, provides several distinct advantages due to their specialized knowledge of the region’s unique geographical and regulatory environment. The primary benefits include: Local Expertise and Geology Knowledge Denver contractors are uniquely experienced in addressing…
-
How do I Know if I Need Foundation Repairs?
Read More »: How do I Know if I Need Foundation Repairs?Determining if you need foundation repairs involves looking for specific physical warning signs and conducting professional assessments. Common indicators of foundation trouble include uneven or sloping floors, doors that stick or fail to open properly, and visible cracks in walls.…
-
How do I Use a Wire Crimping Tool?
Read More »: How do I Use a Wire Crimping Tool?To use a wire crimping tool effectively for foundation repair or electrical monitoring systems, follow these professional steps based on ICC-approved standards: Preparation: Set up a well-lit, ventilated workspace. Inspect your manual wire crimper or hydraulic tool for damage or…
-
How do I Choose the Right Crimping Tool?
Read More »: How do I Choose the Right Crimping Tool?Choosing the right crimping tool depends primarily on the scale of your project and the specific electrical demands of the application. According to the guide, you should consider the following factors: Project Scale and Load: Manual wire crimpers or crimping…