Cracks in a new home typically fall into two categories: normal cosmetic shrinkage or signs of problematic foundation movement. Most buildings experience a degree of normal settling within the first few years as the soil compresses under the weight of the new structure. This natural curing and compaction process often results in hairline cracks, usually less than 1/16 inch wide, appearing along drywall seams or in concrete.
However, cracks can also signal differential settlement, where different parts of the foundation shift at uneven rates. You should be concerned if you notice the following:
- Settlement cracks that exceed 1/8 inch in width or follow specific patterns, such as diagonal cracks extending from the corners of doors and windows.
- Stair-step cracks in exterior masonry, brick veneer, or foundation walls.
- Functional issues such as doors and windows that stick, gaps forming around frames, or noticeably sloping floors.
In newly built homes, these signs often appear within the first 12 to 18 months due to initial soil compression. While minor hairline fissures are often harmless, widening cracks or those exceeding 1/8 inch demand professional evaluation to prevent progressive damage.
We provide a network of structural engineers and ICC- and ISO-certified products to help address these concerns. If you observe these symptoms, we recommend you consult a structural engineer or our engineering team for project-specific design and installation guidance.
Related FAQs
-
How do You Perform a Static Load Test on a Helical Pier?
Read More »: How do You Perform a Static Load Test on a Helical Pier?Performing a static load test on a helical pier (or pile) involves a systematic process following the ASTM D1143 standard to directly measure axial capacity. The procedure is broken down into setup, execution, and interpretation: ### 1. Pre-Test Setup Location…
-
What is the Difference between Static and Dynamic Pile Load Testing?
Read More »: What is the Difference between Static and Dynamic Pile Load Testing?The primary difference between static and dynamic pile load testing lies in how the force is applied, the duration of the test, and the level of accuracy provided. While both methods are used to verify the capacity of helical piles,…
-
How do You Interpret Torque-to-capacity Ratios During Installation?
Read More »: How do You Interpret Torque-to-capacity Ratios During Installation?Interpreting torque-to-capacity ratios involves using an empirical relationship to estimate a helical pile’s ultimate capacity during the installation process. This is known as the Torque Correlation Method. ### The Correlation Formula The primary calculation used for this interpretation is Qu…
-
What are the Standard Methods for Testing Helical Pile Load Capacity?
Read More »: What are the Standard Methods for Testing Helical Pile Load Capacity?Standard methods for testing helical pile load capacity primarily include direct measurement through static load testing and empirical estimation via torque correlation. These methods ensure that installed piles meet design specifications and building code requirements. Static Load Testing (ASTM D1143):…
-
Why is Pile Load Testing Required for Commercial Construction Projects?
Read More »: Why is Pile Load Testing Required for Commercial Construction Projects?For commercial construction projects, pile load testing is a non-negotiable quality assurance requirement primarily driven by safety, design validation, and legal mandates. Key reasons for requiring these tests include: Design Validation: Load testing is the only definitive way to verify…