Cracks in a new home typically fall into two categories: normal cosmetic shrinkage or signs of problematic foundation movement. Most buildings experience a degree of normal settling within the first few years as the soil compresses under the weight of the new structure. This natural curing and compaction process often results in hairline cracks, usually less than 1/16 inch wide, appearing along drywall seams or in concrete.
However, cracks can also signal differential settlement, where different parts of the foundation shift at uneven rates. You should be concerned if you notice the following:
- Settlement cracks that exceed 1/8 inch in width or follow specific patterns, such as diagonal cracks extending from the corners of doors and windows.
- Stair-step cracks in exterior masonry, brick veneer, or foundation walls.
- Functional issues such as doors and windows that stick, gaps forming around frames, or noticeably sloping floors.
In newly built homes, these signs often appear within the first 12 to 18 months due to initial soil compression. While minor hairline fissures are often harmless, widening cracks or those exceeding 1/8 inch demand professional evaluation to prevent progressive damage.
We provide a network of structural engineers and ICC- and ISO-certified products to help address these concerns. If you observe these symptoms, we recommend you consult a structural engineer or our engineering team for project-specific design and installation guidance.
Related FAQs
-
What is the Relationship between Installation Torque and Soil Bearing Capacity?
Read More »: What is the Relationship between Installation Torque and Soil Bearing Capacity?Installation torque is used as a real-time indicator of soil bearing capacity because the rotational resistance encountered by the helix plates reflects the soil’s shear strength. As the helical pier advances into competent strata, the torque required to turn it…
-
How do Engineers Calculate the Ultimate Geotechnical Capacity of a Helical Pile?
Read More »: How do Engineers Calculate the Ultimate Geotechnical Capacity of a Helical Pile?To calculate the ultimate geotechnical capacity of a helical pile, we utilize two primary methodologies: the individual bearing method and the torque factor method. These approaches allow us to ensure structural loads are successfully transferred to competent bearing strata. $Q_{ult}…
-
Why is a Geotechnical Investigation Necessary to Verify Soil Bearing Capacity?
Read More »: Why is a Geotechnical Investigation Necessary to Verify Soil Bearing Capacity?A geotechnical investigation is essential because it provides the site-specific data required to identify competent bearing strata and accurately size helical pier systems. Relying on general benchmarks is insufficient because actual soil bearing capacity varies significantly based on moisture content,…
-
How is the Soil Bearing Capacity Determined for Helical Pier Installation?
Read More »: How is the Soil Bearing Capacity Determined for Helical Pier Installation?To ensure long-term structural stability, we determine soil bearing capacity through a combination of upfront geotechnical investigations and real-time field verification during installation. Geotechnical Investigation Before installation begins, we recommend a site-specific geotechnical report to map the soil profile. This…
-
Does the Water Table Level Affect the Soil Bearing Capacity for Helical Piers?
Read More »: Does the Water Table Level Affect the Soil Bearing Capacity for Helical Piers?Yes, groundwater fluctuations are a critical factor in determining soil bearing capacity. A rising water table reduces the effective stress and overall strength of the soil, which in turn diminishes the load capacity of a helical pier. Because groundwater levels…