Differentiating between normal settling and problematic movement in a new home involves examining the size, shape, and frequency of specific indicators. Most new buildings experience some degree of uniform, vertical movement as the soil compresses, which is typically acceptable.
Normal, Harmless Settling
These signs are part of the natural curing and compaction process within the first year or two and usually do not impact structural integrity:
- Hairline cracks: Thin, random cracks in drywall or concrete that remain less than 1/16 inch wide.
- Cosmetic shrinkage: Small cracks that often appear along drywall seams or near windows due to lumber drying.
- Functional stability: Doors and windows continue to operate smoothly without sticking or frame distortion.
Problematic Structural Movement
Differential settlement, where one part of the foundation moves more than another, requires professional attention. Watch for these red flags:
- Crack Size and Pattern: Cracks that exceed 1/8 inch in width (3mm), particularly diagonal cracks above door frames or stair-step patterns in exterior brick veneer and masonry.
- Operational Issues: Windows or doors that stick, fail to latch, or show visible gaps between the frame and the wall.
- Surface Changes: Noticeably sloping, uneven, or bouncy floors, and trim or cabinets separating from walls or ceilings.
- Progression: Cracks that continue to widen or new symptoms that emerge after the initial 18 months of construction.
If you observe these symptoms, we recommend consulting a structural engineer to assess the situation. We provide Engineering Excellence and Design Support through our network of engineers to help determine if foundation repair solutions, such as Helical Pier Systems, are necessary for permanent stabilization.
Consult a structural engineer or the manufacturer’s engineering team for project-specific design and installation guidance. Products are certified to ICC/ISO where indicated — installations must comply with applicable building codes and ICC-ES acceptance criteria (AC358).
Related FAQs
-
What are the Pros and Cons of Helical Piers vs Push Piers?
Read More »: What are the Pros and Cons of Helical Piers vs Push Piers?When evaluating foundation repair solutions, the choice between helical piers and push piers depends on load mechanisms, soil conditions, and project scale. Below are the primary pros and cons of each system: ### Helical Piers Pros: Immediate Load Capacity: They…
-
Which Pier System is Best for Underpinning a Sinking Foundation?
Read More »: Which Pier System is Best for Underpinning a Sinking Foundation?Selecting the best pier system for a sinking foundation depends on several project-specific factors, including soil conditions, structural loads, and accessibility. Both push piers and helical piers offer reliable underpinning solutions, but they function differently: Push Piers: These are often…
-
Which is Better for Residential Foundation Repair: Push Piers or Helical Piers?
Read More »: Which is Better for Residential Foundation Repair: Push Piers or Helical Piers?Selecting between push piers and helical piers for residential foundation repair depends on your specific soil conditions, the weight of the structure, and the accessibility of the site. ### Helical Piers for Residential Use Helical piers are frequently the preferred…
-
When should I Use Push Piers Instead of Helical Piers?
Read More »: When should I Use Push Piers Instead of Helical Piers?When determining the appropriate foundation repair solution, push piers are typically used in specific scenarios where their unique mechanical principles offer an advantage over helical piers. You should use push piers when: Reaching deep bearing strata: They are an ideal…
-
What Foundation Repair Products do I Need for a Helical Pier Kit?
Read More »: What Foundation Repair Products do I Need for a Helical Pier Kit?A standard helical pier kit provided by Helical Technology includes all the necessary components for field assembly and installation. To successfully implement this system, you will need the following products: Lead Section: This is the initial structural point of load…