Polyurethane foam injection is not a permanent solution for structural loads or foundation settlement. While it is an effective tool for non-structural applications, such as filling minor voids or leveling interior slabs, sidewalks, and driveways, it lacks the engineered capacity to support a building’s foundation long-term.
For a permanent solution, we recommend Helical Piers or Push Piers. Unlike foam, which may degrade or fail to address deep-seated soil movement, our steel pier systems provide permanent underpinning by transferring the structural weight past unstable surface soils to competent bearing strata or bedrock.
Why Steel Piers Outperform Polyurethane Foam:
- Permanence: Steel piers are engineered to provide a lifetime of stability, whereas foam is considered a temporary lift for non-structural slabs.
- Load-Bearing Capacity: Our helical pier systems can support loads exceeding 100 tons per pier, while polyurethane foam is typically limited to lifting loads under 20 tons.
- Soil Adaptability: In expansive clay or high-moisture soils, foam often fails to reach the stable strata needed to prevent future movement. Our advanced earth anchoring systems bypass these active soil zones entirely.
- Engineering Standards: We utilize ICC and ISO Certified products backed by ICC-ES documentation, ensuring your repair meets the highest building code standards.
Because every project has unique soil and structural requirements, we always recommend you consult a structural engineer or our Engineering Excellence and Design Support team for project-specific guidance. Installations must comply with applicable building codes and ICC-ES acceptance criteria (AC358). Please contact us to request a custom quote for your stabilization needs.
Related FAQs
-
How do You Perform a Static Load Test on a Helical Pier?
Read More »: How do You Perform a Static Load Test on a Helical Pier?Performing a static load test on a helical pier (or pile) involves a systematic process following the ASTM D1143 standard to directly measure axial capacity. The procedure is broken down into setup, execution, and interpretation: ### 1. Pre-Test Setup Location…
-
What is the Difference between Static and Dynamic Pile Load Testing?
Read More »: What is the Difference between Static and Dynamic Pile Load Testing?The primary difference between static and dynamic pile load testing lies in how the force is applied, the duration of the test, and the level of accuracy provided. While both methods are used to verify the capacity of helical piles,…
-
How do You Interpret Torque-to-capacity Ratios During Installation?
Read More »: How do You Interpret Torque-to-capacity Ratios During Installation?Interpreting torque-to-capacity ratios involves using an empirical relationship to estimate a helical pile’s ultimate capacity during the installation process. This is known as the Torque Correlation Method. ### The Correlation Formula The primary calculation used for this interpretation is Qu…
-
What are the Standard Methods for Testing Helical Pile Load Capacity?
Read More »: What are the Standard Methods for Testing Helical Pile Load Capacity?Standard methods for testing helical pile load capacity primarily include direct measurement through static load testing and empirical estimation via torque correlation. These methods ensure that installed piles meet design specifications and building code requirements. Static Load Testing (ASTM D1143):…
-
Why is Pile Load Testing Required for Commercial Construction Projects?
Read More »: Why is Pile Load Testing Required for Commercial Construction Projects?For commercial construction projects, pile load testing is a non-negotiable quality assurance requirement primarily driven by safety, design validation, and legal mandates. Key reasons for requiring these tests include: Design Validation: Load testing is the only definitive way to verify…