Polyurethane foam injection is not a permanent solution for structural loads or foundation settlement. While it is an effective tool for non-structural applications, such as filling minor voids or leveling interior slabs, sidewalks, and driveways, it lacks the engineered capacity to support a building’s foundation long-term.
For a permanent solution, we recommend Helical Piers or Push Piers. Unlike foam, which may degrade or fail to address deep-seated soil movement, our steel pier systems provide permanent underpinning by transferring the structural weight past unstable surface soils to competent bearing strata or bedrock.
Why Steel Piers Outperform Polyurethane Foam:
- Permanence: Steel piers are engineered to provide a lifetime of stability, whereas foam is considered a temporary lift for non-structural slabs.
- Load-Bearing Capacity: Our helical pier systems can support loads exceeding 100 tons per pier, while polyurethane foam is typically limited to lifting loads under 20 tons.
- Soil Adaptability: In expansive clay or high-moisture soils, foam often fails to reach the stable strata needed to prevent future movement. Our advanced earth anchoring systems bypass these active soil zones entirely.
- Engineering Standards: We utilize ICC and ISO Certified products backed by ICC-ES documentation, ensuring your repair meets the highest building code standards.
Because every project has unique soil and structural requirements, we always recommend you consult a structural engineer or our Engineering Excellence and Design Support team for project-specific guidance. Installations must comply with applicable building codes and ICC-ES acceptance criteria (AC358). Please contact us to request a custom quote for your stabilization needs.
Related FAQs
-
What is the Difference between End-bearing Piles and Friction Piles in Commercial Design?
Read More »: What is the Difference between End-bearing Piles and Friction Piles in Commercial Design?In commercial pile foundation design, the primary difference between end-bearing piles and friction piles lies in how they transfer structural loads to the subsurface soil. The choice between them depends on the site’s soil stratigraphy and the depth of competent…
-
How Much do Helical Piers Cost per Foot Installed?
Read More »: How Much do Helical Piers Cost per Foot Installed?Based on the provided documentation, there is no flat price per foot for helical pier installation. The total cost is determined by several site-specific variables rather than a standard linear measurement. Because every project requires unique structural calculations and soil…
-
How do Foundation Contractors Estimate Helical Pier Project Costs?
Read More »: How do Foundation Contractors Estimate Helical Pier Project Costs?Foundation contractors estimate helical pier project costs by evaluating several site-specific variables rather than using a flat rate. Because every project has unique structural and geological demands, contractors typically use a custom-quote process that considers the following primary cost drivers:…
-
What Factors Influence Helical Pier Installation Prices for Foundation Repair?
Read More »: What Factors Influence Helical Pier Installation Prices for Foundation Repair?The cost of helical pier installation for foundation repair is influenced by several technical and site-specific variables. Because every project requires custom structural calculations, most providers avoid flat-rate pricing in favor of project-specific quotes. Key factors influencing the total price…
-
What are the Soil Conditions that Favor Round Shaft Helical Piles?
Read More »: What are the Soil Conditions that Favor Round Shaft Helical Piles?Round shaft helical piles are specifically engineered to perform optimally in demanding geotechnical environments. According to the provided technical guide, the following soil conditions and scenarios favor the use of round shafts: Sandy or Granular Soils: Round shafts are preferred…