We recommend steel piers over polyurethane foam when a permanent, engineered structural solution is required. While polyurethane foam is an effective tool for filling voids and performing minor, non-structural lifts for concrete slabs (typically under 2 inches), it is not a permanent fix for structural foundation settlement.
Our advanced earth anchoring systems are designed to address the root cause of settlement by transferring building loads past unstable surface soils down to competent load-bearing strata or bedrock. There are three primary reasons why our engineering team and network of structural engineers prefer steel systems:
- Superior Load-Bearing Capacity: Steel helical or push piers can support loads exceeding 100 tons per pier. In contrast, polyurethane foam is generally limited to lifting slabs and supporting lighter loads, typically under 20 tons.
- Stability in Expansive or Wet Soils: In environments with high moisture or expansive clay, shallow solutions like foam can be compromised by soil movement. Steel piers bypass these active zones entirely, providing long-term durability that foam cannot match.
- Permanent Underpinning: Unlike foam, which may degrade or require re-application over time, our ICC and ISO Certified products provide a permanent foundation repair solution. Steel systems are the industry standard for perimeter foundations, load-bearing walls, and commercial columns.
Because every project presents unique geotechnical challenges, we provide Engineering Excellence and Design Support to ensure the right system is utilized.
Consult a structural engineer or the manufacturer’s engineering team for project-specific design and installation guidance. Products are certified to ICC/ISO where indicated — installations must comply with applicable building codes and ICC-ES acceptance criteria (AC358).
Related FAQs
-
When should You Use Round Shaft Versus Square Shaft Helical Piers?
Read More »: When should You Use Round Shaft Versus Square Shaft Helical Piers?The choice between round shaft and square shaft helical piers depends on your project’s soil conditions, load requirements, and structural goals. Both designs serve as advanced earth anchoring systems, but they excel in different environments: When to use Round Shaft…
-
Which Shaft Type has Better Torsional Strength During Installation?
Read More »: Which Shaft Type has Better Torsional Strength During Installation?The answer depends on the specific application and soil conditions, as both round and square shafts offer distinct advantages in torsional strength: Round Shafts: These are noted for their superior torsional performance due to an axisymmetric geometry. This circular cross-section…
-
Should I Hire a Professional for Concrete Repair?
Read More »: Should I Hire a Professional for Concrete Repair?Hiring a professional for concrete repair in Denver is highly recommended due to the region’s complex geological and regulatory environment. Professionals possess the expertise to distinguish between minor hairline cracks and significant structural issues caused by Denver’s expansive clay soils…
-
What Questions should I Ask Concrete Contractors in Denver?
Read More »: What Questions should I Ask Concrete Contractors in Denver?When hiring concrete contractors in Denver, it is essential to ask specific questions to ensure they can handle the region’s unique geological challenges, such as expansive clay soils and freeze-thaw cycles. Based on local requirements and industry standards, you should…
-
How are Push Piling Piers Used for Foundation Repair in Texas?
Read More »: How are Push Piling Piers Used for Foundation Repair in Texas?In Texas foundation repair, push piers (also referred to as push piling or hydraulically driven sections) are utilized to stabilize sinking structures, particularly in areas with expansive clay soils like Houston, Dallas, and San Antonio. The process involves several technical…