A geotechnical investigation is essential because it provides the site-specific data required to identify competent bearing strata and accurately size helical pier systems. Relying on general benchmarks is insufficient because actual soil bearing capacity varies significantly based on moisture content, density, and stratification.
Performing a thorough investigation—including soil borings and Standard Penetration Tests (SPT)—allows us to:
- Identify Soil Properties: We determine if the soil is cohesive (like clay, where undrained strength dictates capacity) or granular (like sand or gravel, where the friction angle is the primary variable).
- Establish Design Parameters: The data gathered informs the selection of helix plate diameter, the number of helices, and the required embedment depth to ensure structural loads are safely transferred to stable ground.
- Evaluate Environmental Factors: Investigations identify groundwater fluctuations and regional challenges, such as expansive clays, which can reduce effective soil strength or cause volume changes that impact long-term stability.
- Calibrate Field Measurements: While we monitor installation torque in real-time to estimate capacity, those readings must be calibrated against the specific soil profile identified in the geotechnical report to ensure accuracy.
For every project, we recommend you consult a structural engineer or our engineering team for project-specific design and installation guidance to ensure compliance with building codes and ICC-ES AC358 acceptance criteria.
Related FAQs
-
What is the Relationship between Installation Torque and Soil Bearing Capacity?
Read More »: What is the Relationship between Installation Torque and Soil Bearing Capacity?Installation torque is used as a real-time indicator of soil bearing capacity because the rotational resistance encountered by the helix plates reflects the soil’s shear strength. As the helical pier advances into competent strata, the torque required to turn it…
-
How do Engineers Calculate the Ultimate Geotechnical Capacity of a Helical Pile?
Read More »: How do Engineers Calculate the Ultimate Geotechnical Capacity of a Helical Pile?To calculate the ultimate geotechnical capacity of a helical pile, we utilize two primary methodologies: the individual bearing method and the torque factor method. These approaches allow us to ensure structural loads are successfully transferred to competent bearing strata. $Q_{ult}…
-
Why is a Geotechnical Investigation Necessary to Verify Soil Bearing Capacity?
Read More »: Why is a Geotechnical Investigation Necessary to Verify Soil Bearing Capacity?A geotechnical investigation is essential because it provides the site-specific data required to identify competent bearing strata and accurately size helical pier systems. Relying on general benchmarks is insufficient because actual soil bearing capacity varies significantly based on moisture content,…
-
How is the Soil Bearing Capacity Determined for Helical Pier Installation?
Read More »: How is the Soil Bearing Capacity Determined for Helical Pier Installation?To ensure long-term structural stability, we determine soil bearing capacity through a combination of upfront geotechnical investigations and real-time field verification during installation. Geotechnical Investigation Before installation begins, we recommend a site-specific geotechnical report to map the soil profile. This…
-
Does the Water Table Level Affect the Soil Bearing Capacity for Helical Piers?
Read More »: Does the Water Table Level Affect the Soil Bearing Capacity for Helical Piers?Yes, groundwater fluctuations are a critical factor in determining soil bearing capacity. A rising water table reduces the effective stress and overall strength of the soil, which in turn diminishes the load capacity of a helical pier. Because groundwater levels…